Mold remediation
Water damage drying
Fire & smoke cleanup
Storm response
Sewage cleanup
ReconstructionFree visual inspection and a written scope of work before any mitigation begins - photos, moisture readings, and drying logs go in your claim file
The scope we write is the scope we bill. Anything new gets shown to you, in writing, before we touch it.
Get your free estimateFast, Reliable Mold Remediation Across New Territory
Mold remediation in New Territory typically costs $1,800 – $4,200 for a contained room job and $4,500 – $9,000 for whole-area structural drying and treatment, with most jobs completed in 3 – 7 days. That’s the honest range for this market, and you should know it before anyone shows up at your door. Keegan Restoration Houston runs every mold job in New Territory to a written standard: the price goes in writing before work starts, the crew shows up inside the window we give you, and the repair is backed for a full year. Call (325) 550-1783 and we’ll walk you through what your specific situation needs.
Why Keegan Restoration Houston Is New Territory’s Preferred Mold Remediation Company
New Territory homeowners call us because the crews we send are background-checked, uniformed, and dispatched from a team that has been part of the Garrison Partners family since 2005. We document every job with photos and moisture readings formatted to support an insurance claim, so you aren’t stuck arguing with an adjuster about what was actually found behind the drywall.
Our Mold Remediation team knows the dominant failure pattern in this community: polybutylene supply lines from the 1990s build-out that crack at elbow fittings and feed moisture into wall cavities for weeks before anyone notices. We also know New Territory’s clay-rich soils hold water against slab edges and foundation walls long after a storm passes, which means the drying phase here takes more equipment and more patience than in drier parts of Fort Bend County. A live person answers our phones 24/7, so when you find mold at 9 p.m. on a Sunday, you get a real human, not a callback queue.
Restoration work we handle
Black Mold Removal in New Territory
Black Mold Removal in New Territory is a containment-and-removal job, not a surface spray. The black staining homeowners find on baseboards, behind toilets, or along ceiling corners is often Stachybotrys chartarum, which grows when moisture has been present for days or weeks inside a wall cavity. In a New Territory slab-on-grade brick veneer house, that moisture usually traces back to a slab leak, a polybutylene fitting failure, or condensation from a low-slope roof that’s been holding water at the eaves. Removing the visible mold without finding and stopping the moisture source means the same mold returns in 30 to 60 days.
Containment and Source Removal
We set negative air pressure and hard containment before opening any wall that shows black mold, because disturbing a colony without containing it spreads spores through the HVAC system. The source material, whether it’s wet fiberglass batt insulation or compromised drywall, gets cut out and bagged on site. In New Territory’s humid climate, we run desiccant dehumidification during this phase so the exposed stud cavities dry before we treat them.
Post-Remediation Verification
After treatment, we document moisture readings on every affected stud and plate. A written drying log goes to you and, if you’re filing a claim, to your adjuster. The goal is a cavity that measures below the threshold where mold can regrow, verified by instrument, not by eyeballing it.
Mold Removal Contractor in New Territory
A Mold Removal Contractor in New Territory has to understand this community’s specific construction before touching anything. The fastest-growing mold problems we see come from water that’s been trapped inside slab-on-grade walls, where the bottom plates sit directly on concrete and wick groundwater upward. If a contractor skips moisture mapping and just wipes down the visible area with antimicrobial, the hidden wet pockets stay wet and the mold returns within weeks. We don’t work that way.
Moisture Mapping Before Demolition
Before any drywall comes off, we map the affected area with moisture meters and thermal imaging. In a New Territory 1990s brick veneer home, the wet zone often extends two to three feet past the visible staining because the wall cavity is continuous and fiberglass batt moves water laterally. We mark the full wet footprint, write the scope, and get your sign-off on the price before we cut.
Structural Drying That Actually Finishes the Job
The drying phase in New Territory takes longer than in drier parts of Texas. High outdoor humidity and clay soil that holds water against the slab mean our Phoenix dehumidifiers and Injectidry systems often run four to six days instead of two or three. We don’t rush that clock, because the alternative is a repeat visit and a second round of demolition. Every job carries the 365-Day Done Right Promise: if the mold recurs within a year, we return and make it right at no charge.
Trusted Brands We Service in New Territory
Our crews arrive with professional-grade equipment from Phoenix, Dri-Eaz, and Injectidry, the same brands used in IICRC-standard restoration work across Texas. For New Territory homeowners, that matters because your drying job runs against the clock in a subtropical climate. We keep desiccant dehumidifiers, air movers, and HEPA filtration units stocked and serviced so we aren’t waiting on a rental counter when we need equipment on your street in the middle of a humid Fort Bend County week. If a unit fails mid-job, we swap it out same day.
Common Mold Remediation Problems We See in New Territory Homes
- Polybutylene plumbing leaks inside wall cavities: Homes built before 1998 in New Territory often have original polybutylene supply lines that crack at the elbow fittings behind toilets and under slabs. The first sign is frequently a water bill spike, not a visible puddle, and by the time mold shows, the cavity has been wet for weeks.
- Hidden wet pockets in slab-on-grade walls: The bottom plates and lower stud sections sit directly on concrete and wick moisture from the ground in New Territory’s clay-rich soils. Surface cleaning alone leaves these pockets wet, and the mold grows right back.
- HVAC contamination during remediation: If a contractor opens a moldy wall without containment, spores get pulled into the return air and distributed through every room. We set negative air containment before demolition so the rest of the house stays clean.
- Roof leaks from low-slope sections: Many New Territory homes have low-slope or composition shingle roofs that pond water during the long spring rainfall events typical of the Brazos River watershed. Water works down into ceiling cavities and wall tops, and the mold appears at the ceiling corners first.
See the difference
Before
After
Before
After
Before
AfterPricing for Mold Remediation in New Territory, TX
A contained mold remediation in a single New Territory room, such as a bathroom or closet, typically runs $1,800 – $4,200 including containment, source removal, drying, antimicrobial treatment, and post-remediation verification. A whole-area job involving multiple rooms, wall cavities opened to structural drying, and HVAC cleaning generally falls between $4,500 and $9,000. Black mold removal with full containment and extended structural drying lands at the higher end of that range, while a small patch caught early behind a baseboard can sometimes be handled for less. The factors that move the price: how far the wet zone extends past visible staining, whether HVAC ducting needs cleaning, and how long the drying equipment has to run in New Territory’s humid air. Call (325) 550-1783 for a free estimate with a written scope before any work begins.
We Also Serve Cities Near New Territory
Keegan Restoration Houston handles mold remediation throughout Fort Bend County and beyond. Our crews serve homeowner communities in New Territory as well as Houston, Katy, Sugar Land, and Baytown. If you’re in a neighboring community and dealing with mold after a water event, call the same number and you’ll get the same written-price standard.
Serving New Territory, TX - Our Local Coverage Area
We’re based in the New Territory area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Mold Remediation in New Territory
No, mold remediation itself does not require a standalone permit from Fort Bend County for the remediation work. However, if the job involves structural repairs beyond mold removal, such as replacing sheathing or reframing sections affected by long-term water damage, those repairs may require a building permit. Keegan Restoration Houston documents the full scope of work in writing, and we coordinate with your adjuster if a permit is needed for the repair portion of the job. Call (325) 550-1783 and we can tell you whether your specific job triggers any permit requirements.
Most mold remediation jobs in a 1990s New Territory brick veneer home take 3 to 7 days from containment setup through final moisture verification. The drying phase drives the timeline: New Territory’s high outdoor humidity and clay soils that stay damp against the slab mean the drying equipment often runs 4 to 6 days before stud cavities reach acceptable moisture levels. A small contained bathroom job may finish sooner, while a whole-area job with HVAC contamination can run the full week. We’ll give you a day-by-day schedule in the written scope before we start.
If the mold is confined to the surface of the drywall and the moisture source has been stopped, a targeted treatment may work without full removal. But in a New Territory slab-on-grade home, mold behind baseboards frequently indicates water wicking up from the slab or a slow plumbing leak inside the wall, and the only way to verify the full affected area is to pull the baseboard and check the wall cavity with moisture meters. Treating only the visible surface while the cavity stays wet guarantees recurrence, which is why we map moisture before recommending any no-demolition approach. Call (325) 550-1783 for an assessment with instruments, not guesswork.
Category 2 water, also known as gray water, causes the majority of mold problems we see in New Territory homes. Category 2 includes water from failed plumbing lines, appliance overflows, and sump pump failures. In New Territory specifically, the polybutylene supply line failures common in pre-1998 construction are the leading Category 2 source, because the leak starts small, runs for weeks inside a wall cavity, and creates the sustained damp conditions mold needs to take hold. Category 1 clean water that sits for more than 48 hours degrades into Category 2 conditions and carries the same mold risk.
For most contained mold remediation jobs, you do not need to move out, because hard containment and negative air pressure isolate the work area from the rest of the house. If the mold is located in a bedroom, a bathroom adjacent to the primary bedroom, or if the HVAC system itself is contaminated, a few nights elsewhere may make the job faster and safer for your household. For families with infants, elderly residents, or anyone with respiratory conditions, we recommend discussing temporary accommodations with us before we set up the containment. We’ll tell you straight what your specific floor plan and mold location require.
Call Keegan Restoration Houston for Mold Remediation in New Territory
If you’ve found mold, or you suspect it behind a wall after a water bill spike or a slow leak, call (325) 550-1783. A live person answers, day or night. We’ll schedule an assessment, map the moisture, put the price in writing, and get your house back to a condition you can verify with your own eyes and the documentation we hand you. No door-price games, no crew you’ve never heard of, no repeat visits because the job wasn’t done right the first time. That’s the Garrison Standard, and it applies to every mold job we run in New Territory.
Written by Shane Pruitt, Owner at Keegan Restoration Houston, serving New Territory with mold remediation, water damage restoration, and fire damage restoration. Part of the Garrison Partners family since 2005.