Water damage drying
Fire & smoke cleanup
Mold remediation
Storm response
Sewage cleanup
ReconstructionFree visual inspection and a written scope of work before any mitigation begins - photos, moisture readings, and drying logs go in your claim file
The scope we write is the scope we bill. Anything new gets shown to you, in writing, before we touch it.
Get your free estimateRestoration work we handle
See the difference
Before
After
Before
After
Before
AfterBurst Pipe Restoration in Houston, TX
A burst pipe in Houston typically costs between $900 and $4,500 to restore depending on how long the water ran before it was caught, and most jobs can be started the same day you call (325) 550-1783. We handle the full scope: stopping the source, extracting the water, drying the structure to a measurable standard, and putting your walls, floors, and ceilings back together. The work follows the same process we use on every Water Damage Restoration in Houston job, which means you get a written price before anything starts and a one-year guarantee when it’s done.
Keegan Restoration Houston sends background-checked, uniformed technicians to handle burst pipe damage across Harris County, from Katy to Kingwood to Pearland. We run the job to The Garrison Standard: show up inside the window we give you, put the price in writing, do the work by the book, and stand behind it for a full year.
When You Need Burst Pipe Restoration
Most Houston homeowners don’t realize they need our Water Damage Restoration services until damage from a burst pipe has already spread. Here’s what we typically see on calls across the Houston area:
- Water gushing from a pipe break in the wall or ceiling. If you can hear water running with all fixtures off, turn off your main shutoff and call us. Water moves fast through drywall and insulation.
- Sagging or discolored drywall. In humid Houston homes, a slow leak inside a wall can saturate drywall for days before it shows. By the time you see the stain, the moisture has wicked upward into the wall cavity.
- Cold-weather bursts in older Houston homes. Houston’s clay soil and occasional hard freezes put real stress on rigid piping, especially in pier-and-beam homes in the Heights or Montrose where pipes run through uninsulated crawl spaces.
- Water heater supply line failures. These are one of the most common sources of burst-pipe damage we respond to. A failed supply line can dump 50 gallons or more onto a garage floor in under an hour.
- Musty odor within 24 to 48 hours after any leak. Water that sits in Houston’s warm, humid air starts supporting microbial growth fast. That odor means the drying job was incomplete or never happened.
- High water bill with no visible leak. If your usage spiked and you can’t find water, a pipe may have failed inside a slab or wall cavity. We find it and fix it.
Our Burst Pipe Restoration Process
Every job runs on a documented process. That documentation matters when you file an insurance claim, and it’s why we format our moisture readings, drying logs, and photos to support that claim from day one. Here’s the sequence:
- Source control and site assessment. We shut off the water at the main if you haven’t already, then map the scope of loss. We identify what’s wet, how wet, and how far the water has traveled through your framing, flooring, and walls.
- Water extraction. We pull standing water with truck-mounted and portable extraction units. The faster water comes out, the less drying time your structure needs and the less material has to be cut out and replaced.
- Containment and removal. We set up physical containment to keep unaffected rooms clean, then remove saturated materials that can’t be dried in place, like wet insulation, carpet pad, or drywall that has lost structural integrity.
- Structural drying. We place professional-grade air movers and dehumidifiers, following IICRC drying principles. We measure moisture content daily and log every reading. We don’t pull equipment until the numbers show the structure is dry, not just the surface.
- Repair and reconstruction. We rebuild what we removed: drywall, paint, trim, flooring, cabinetry. The written price you approved before work started covers this scope, and it doesn’t move at the door.
- Final walkthrough and guarantee. We walk the site with you, review the drying log and repairs, and put your 365-Day Done Right Promise in writing before we leave.
Burst Pipe Restoration Pricing in Houston
We put a written price in front of you before any work starts. Here’s what Houston homeowners can expect based on the scope of the damage:
- Small contained leak (under 50 square feet): $900 to $2,200. This covers extraction, targeted drying, and minor drywall repair.
- Mid-size burst or supply line failure (one to two rooms): $2,200 to $4,500. Includes removal of saturated materials, drying, and reconstruction of affected walls and flooring.
- Large or multi-room pipe break: $4,500 to $9,000+. Common when a pipe fails on an upper floor and water travels down through multiple rooms and the ceiling below.
What moves the price: how long the water ran, whether it reached a second floor or crawl space, how much drywall and insulation has to come out, and whether flooring can be dried or needs replacement after Ceiling & Roof Leak Water Damage. Houston’s humidity also matters, slower evaporation means dehumidifiers run longer on our side of I-10 than they would in drier climates.
Estimates are free. Call (325) 550-1783 and we’ll send a technician with the equipment and experience to give you an honest number.
FAQs – Burst Pipe Restoration
How much does burst pipe restoration cost in Houston?
Burst pipe restoration in Houston typically runs $900 to $4,500 for most homes, with larger multi-room breaks going higher depending on how far the water traveled and what has to be rebuilt. Call (325) 550-1783 for a free estimate, and we’ll put the price in writing before any work begins.
Can you fix a burst pipe the same day in Houston?
Yes, we can typically start same-day work on a burst pipe in Houston and the surrounding area. Our technicians are dispatched with Emergency Water Extraction and drying equipment already on the truck, so we don’t have to leave and come back to begin the job. A live person answers our phones 24/7 at (325) 550-1783.
Is burst pipe damage covered by homeowners insurance?
Most Houston homeowners policies cover sudden and accidental water damage from a burst pipe, but the claim goes smoother with documentation. We photograph every step, log moisture readings daily, and format the scope of loss to match what your adjuster needs. We don’t negotiate your claim for you, but we document the job properly so you’re not fighting your carrier with incomplete records.
How long does it take to dry a house after a burst pipe?
After Flood Cleanup, structural drying in Houston typically takes three to five days once the standing water is removed. Walls, subfloors, and framing dry slower than the surface air, and we won’t pull our equipment until our moisture meters confirm the structure is actually dry. Rushing this step is how you end up with mold behind fresh drywall. Call (325) 550-1783 for an honest assessment of your specific situation.
Written by Shane Pruitt, Owner at Keegan Restoration Houston, serving Houston.