Water damage drying
Fire & smoke cleanup
Mold remediation
Storm response
Sewage cleanup
ReconstructionFree visual inspection and a written scope of work before any mitigation begins - photos, moisture readings, and drying logs go in your claim file
The scope we write is the scope we bill. Anything new gets shown to you, in writing, before we touch it.
Get your free estimateRestoration Company in Santa Fe, TX
Damage restoration in Santa Fe, TX is shaped by the Gulf Coast: hurricane-force winds, storm surge, and the kind of humidity that turns a small leak into a mold problem within 48 hours. Homes here sit on slab foundations in newer subdivisions or on pier-and-beam lots near Dickinson Bayou, and each responds to water and fire differently. Keegan Water Damage Restoration handles water, fire, and mold work in Santa Fe with written pricing before any work starts. Call (325) 550-1783 when you need a crew that documents everything and stands behind the repair for a full year.
Why Santa Fe Homes Are Different
Santa Fe’s location along the Gulf Coast means restoration work here is dominated by hurricanes, tropical storms, and the wind-driven rain that follows. The low-lying areas near Dickinson Bayou and Halls Bayou flood first, and when that water recedes it leaves behind more than damp drywall. High humidity year-round accelerates mold growth, so a job that sat for two days in a drier climate becomes a full remediation here.
Most Santa Fe housing stock is single-family detached, built from the 1970s onward. You’ll see brick veneer or hardiplank on slab foundations in the newer subdivisions, and older pier-and-beam homes closer to the center of town. Slab homes channel water into wall cavities and under baseboards. Pier-and-beam homes let water pool underneath, where it feeds mold in the floor joists. Both require a different drying setup, and both need technicians who understand how Santa Fe’s clay-heavy soil holds moisture against a foundation. That’s why our crews check the garage slab and ground-floor utility closets early on every flood job here.
Restoration work we handle
Our Main Santa Fe Services
The two calls we get most from Santa Fe homeowners are for water damage after a storm and mold that appears in the weeks after the water recedes. Each service has its own page with pricing, process, and what to expect.
Water Damage Restoration in Santa Fe
Flood water in Santa Fe carries silt, sewage, and salt from the bayous, which changes how we approach extraction and drying. We pull standing water first, then map the moisture with professional-grade tools to find what the eye can’t see. After a hurricane, the first thing our techs check is whether the gas water heater pilot was extinguished by rising water and whether the garage slab is now a mold reservoir. Read the full breakdown at Water Damage Restoration in Santa Fe.
Fire Damage Restoration in Santa Fe
House fires in Santa Fe often start in attached garages or ground-floor utility closets, where water heaters and HVAC units sit close to stored fuel and cardboard. The soot from a garage fire behaves differently than a kitchen fire: it’s greasier, and it buries into hardiplank siding and brick veneer. We clean, seal, and rebuild to a written scope. Learn more at Fire Damage Restoration in Santa Fe.
Mold Remediation in Santa Fe
Santa Fe’s year-round humidity means mold after water damage is not a maybe, it’s a matter of days. We contain the affected area, remove contaminated drywall and insulation, and dry the structure to a moisture level that won’t feed regrowth. If your home flooded and dried on its own, the mold may already be behind the walls. Details on process and pricing at Mold Remediation in Santa Fe.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Santa Fe
We run Dri-Eaz and Injectidry drying systems alongside XPOWER air movers on Santa Fe jobs. These are the same professional-grade brands used in IICRC-standard restoration work, not rental-counter equipment. Most parts are stocked on our trucks, which keeps turnaround tight when a storm has half the county calling.
See the difference
Before
After
Before
After
Before
AfterPricing for Restoration Company in Santa Fe, TX
| Service | Typical range in Santa Fe |
|---|---|
| Water extraction and drying | $1,800 – $4,200 |
| Sewage cleanup | $3,500 – $8,000 |
| Structural drying and dehumidification | $1,200 – $3,000 |
| Bathroom water damage repair | $900 – $2,500 |
| Kitchen water damage repair | $1,500 – $4,500 |
| Ceiling water damage repair | $600 – $1,800 |
| Water heater leak restoration | $1,000 – $3,000 |
| Frozen pipe burst cleanup | $1,500 – $4,000 |
| Fire damage cleanup | $3,500 – $12,000 |
| Smoke and soot removal | $1,500 – $4,500 |
| Soot damage from a furnace puffback | $1,200 – $3,500 |
| Mold remediation | $1,500 – $6,000 |
In Santa Fe, prices climb when floodwater carries sewage from the bayous or when a home sat wet for days before power came back and drying could start. Regardless of the number, our price goes in writing before any work begins, and it doesn’t move at the door. That’s The Garrison Standard.
Neighborhoods We Serve in Santa Fe
We work throughout Santa Fe, TX and the surrounding pockets where homes were built on former prairie that drains slowly after a storm. Our typical response for a damage call in the area is within 60 to 90 minutes.
- Algoa area near Dickinson Bayou
- Arcadia area off FM 646
- Highland Bayou corridor
- Halls Bayou lowlands
- Santa Fe city center and pier-and-beam lots
Service Area – Cities Near Santa Fe
We also run restoration jobs in the neighboring communities that share the same Gulf Coast weather patterns. That includes Dickinson, TX, Bacliff, TX, Friendswood, TX, and Alvin, TX. If your home is in one of these areas and you’re dealing with water, fire, or mold damage from the same storm system, call for a free estimate.
Serving Santa Fe, TX - Our Local Coverage Area
We’re based in the Santa Fe area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Restoration Company in Santa Fe
We answer live 24 hours a day and can typically have a crew onsite in Santa Fe within 60 to 90 minutes for water emergencies. Fire and mold jobs are scheduled by scope. Call (325) 550-1783 and a real person picks up.
Structural repairs and major rebuilds usually require a City of Santa Fe permit, and we handle the paperwork as part of the written scope. Emergency water extraction and drying don’t wait for permits. Your written quote will list any permit requirements before work starts.
Most homeowners policies cover storm, fire, and sudden water damage, though flood coverage depends on your policy. We document every job with photos and moisture readings formatted to support your claim, and we coordinate directly with your adjuster. Call (325) 550-1783 for a free estimate.
What happens when you call
- 1A real person answersNo phone trees - talk to a local damage restoration pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Santa Fe Customers Say
"Quiet, focused crew. Everyone had a job and they did it."
- Alice M."Basement water from a bad sump pump. Extracted, dried, and treated for mold. The smell is gone."
- Perry J."Mold test after drying came back clean. They gave me the readout in writing so I could keep it with the insurance file."
- Gus P.